Malibu Pool Service | pool care | Repairs

General Pool repairs

Save on Malibu Pool service call today! 805-603-0778

Pools like houses and automobiles require repairs and extra work every now and them. There are quite a few parts that have to work correctly in order for the pool to operate like it is supposed to. Pools have a very simple but important filtration system. Pools usually use a single D.E. filter with about 8 grids to filter out debris that goes through the pump and the basket.  Malibu pool service also specializes in all types of repairs and installations. Filters measure the overall pressure in pounds per square inch or PSI. The general rule of thumb is once the pressure gauge raises 10 PSI from the clean start pressure it is due for a filter clean. The time in between filter cleans depends on how dirty the pool usually gets and how many people use the pool. However, the average pool needs to be cleaned every three months.

The next most common repair that happens on a regular schedule would be salt cell cleans. Salt cells need to remain clean to ensure the salt is properly chlorinating the pool. Cleaning salt cells is very simple but it is important that a professional cleans it. Improper cleaning can easily damage or even destroy a salt cell which is a big investment that you don’t want to have to replace.

Malibu pool service and spa care
Malibu spas

Types of Pool Pumps

Arguably the most important part to any pool would be the pool pump. There are many different types and brands of pools pumps. Regular maintenance of your pool pump is very important. Pool pumps tend to leak as they get older. The seals inside tend to fail. Pump seals can be replaced at a lot lower price than the cost of buying a new pump. Other things such as gaskets for the pump can fail over time but can easily be fixed. Make sure to call your local pool service if you notice anything weird with your pump before it is too late.

Why should I hire a Malibu pool service?

Maintaining your pool requires weekly pool service. It is very important to keep your chemicals balanced. Along with chemically balanced water levels you need to remove debris from your pool every week. If your pool remains dirty for extended amounts of time it can cause very expensive and larger problems down the road. The short term effect of pools with a lot of debris is algae. Debris and plants in your pool decay and emit phosphates that promote algae growth.

Hiring a pool cleaner will help ensure that you don’t have any problems with algae as well as pump failure. Another plus of hiring a pool guy is that your pool will always look presentable and clean. The pool is usually the first place guest look when they are in your backyard. If you don’t already have a service you should definitely consider getting one.

What is included in a typical Malibu Pool Service?

Part 2:

The second part of Pools service is water chemistry. Water chemistry plays a big role in the proper care of your pool. Unbalanced water can lead to hazardous water conditions. If levels are too low the water will look murky or even green depending on the severity of it.  Low chemical levels promote bacteria and algae growth. On the other hand, if levels are too high it can cause skin and eye irritation. High chemical levels can also destroy your pools plaster and equipment.

There are many chemicals involved in pool care. The most import two that everyone know about are chlorine levels, and PH levels. Both of these are measured in parts per million. Chlorine acts as an anti-bacterial component. It kills germs in the pool and potential algae blooms. The two values of chlorine that are usually tested for are free chlorine and total chlorine. The total chlorine is the total amount of chlorine currently being used in the pool. The free Chlorine levels are the parts per millions of chlorine that are still available to fight bacteria and algae. Chlorine is the single most important chemical that is put into your pool. There are a few ways to add chloride to a pool and they all have their ups and downs.


The most common way to maintain chlorine levels is to add chlorine tablets to a floater or chlorinator. Tablets of chlorine are composed of 50% chlorine, 25% acid, and lastly 25% conditioner – in most cases – The second most common way to add chlorine to a pool is by pouring liquid chlorine into it. Liquid chlorine does a very good job raising the overall amount of chlorine in the pool. It also Kills chlorine quickly. The third most popular wat to add chlorine is with powdered shock. Shock is meant to shock the pool with large amounts of chlorine very quickly. Shock comes in packages or buckets and it is very fine powder like baking powder, Chlorine shock can either be dumped into the skimmer or scattered around the pool. Those are some of the most popular forms of chlorinating a pool however there are many more.

 Water Chemistry

The second most common chemical that is checked on a weekly basis is the pools PH level. Ph show the overall acidity or non-acidity of the pool water. Acid helps the chlorine work better. However, it is very important that you keep your PH balanced in the right level. If the acid level is too it will eat your pools plaster and burn swimmers eyes. If the acidity is too low calcium deposits will build up around the water line on the tile. To high of a PH level will also lower the power of your chlorine to kill germs and algae. Unlike chlorine, acid is normally added in only one form. Acid comes in gallons jugs and is poured around the outside of the pool.

The other chemicals that play a big role in pool water chemistry are conditioner, alkalinity, water hardness, tds, and bromine.

To recap the most important Malibu pool service  chemicals are

·         Total Chlorine

·         Free Chlorine

·         Ph / Acid

·         Alkalinity

·         Conditioner

·         Water hardness

·         TDS

·         Bromine